--
-- Juniper Enterprise Specific MIB: Collector PIC MIB
--
-- Copyright (c) 2003, 2005-2006, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--JUNIPER-COLLECTOR-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,Counter64,Gauge32,Integer32,NOTIFICATION-TYPE,OBJECT-IDENTITY,TimeTicksFROM SNMPv2-SMI
DateAndTime,TEXTUAL-CONVENTION,DisplayStringFROM SNMPv2-TC
ifIndex, ifDescr
FROM IF-MIB
InetAddressType,InetAddress
FROM INET-ADDRESS-MIB -- RFC2851CounterBasedGauge64FROM HCNUM-TC
jnxMibs, jnxCollectorNotifications
FROM JUNIPER-SMI;jnxCollectorMIB MODULE-IDENTITYLAST-UPDATED"200311130000Z"-- Nov 13, 2003ORGANIZATION"Juniper Networks, Inc."CONTACT-INFO" Juniper Technical Assistance Center
Juniper Networks, Inc.
1194 N. Mathilda Avenue
Sunnyvale, CA 94089
E-mail: support@juniper.net"DESCRIPTION"Provides data about each of the Collector PICs on a router."-- revision historyREVISION"200311130000Z"DESCRIPTION"Initial revision."::={ jnxMibs 28}JnxCollPicStateDef ::=TEXTUAL-CONVENTIONSTATUScurrent
DESCRIPTION"Identifies specific error conditions that may exist on a
Collector PIC."SYNTAXBITS{jnxCollStateSoftOverload(0),-- soft flow overloadjnxCollStateHardOverload(1),-- hard flow overloadjnxCollStateMemoryUnavail(2)-- unavailable memory}--
-- Global Stats
--jnxCollGlobalStats OBJECT-IDENTITYSTATUScurrentDESCRIPTION"Global, router-wide collector stats."::={ jnxCollectorMIB 1}jnxCollGlobalCreatedFiles OBJECT-TYPESYNTAXCounter64MAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"The total number of file created by all the
collector pics on the router since the last
time the router was reset."::={ jnxCollGlobalStats 1}jnxCollGlobalOpenFiles OBJECT-TYPESYNTAXCounter64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of open collector files currently
present on the router."::={ jnxCollGlobalStats 2}--
-- Per-Collector PIC data
--jnxCollPicIfTable OBJECT-TYPESYNTAXSEQUENCEOF JnxCollPicEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Data about each collector pic currently present
on the router."::={ jnxCollectorMIB 2}
jnxCollPicIfEntry OBJECT-TYPESYNTAX JnxCollPicEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry provides information about a single Collector PIC.
Each Collector PIC contains a single interface and is
identified by its ifIndex."INDEX{ ifIndex }::={ jnxCollPicIfTable 1}
JnxCollPicEntry ::=SEQUENCE{---- File statistics--
jnxCollPicIfCreatedFiles Counter64,
jnxCollPicIfCreatedFileRate Gauge32,
jnxCollPicIfPeakCreatedFileRate Gauge32,
jnxCollPicIfExportedFiles Counter64,
jnxCollPicIfExportedFileRate Gauge32,
jnxCollPicIfPeakExportedFileRate Gauge32,
jnxCollPicIfDestroyedFiles Counter64,
jnxCollPicIfDestroyedFileRate Gauge32,
jnxCollPicIfPeakDestroyedFileRate Gauge32,---- Record statistics--
jnxCollPicIfProcRecords Counter64,
jnxCollPicIfProcRecordsRate Gauge32,
jnxCollPicIfPeakProcRecordsRate Gauge32,---- Memory statistics--
jnxCollPicIfMemoryUsed CounterBasedGauge64,
jnxCollPicIfMemoryFree CounterBasedGauge64,---- Ftp statistics--
jnxCollPicIfFtpBytes Counter64,
jnxCollPicIfFtpByteRate Gauge32,
jnxCollPicIfPeakFtpByteRate Gauge32,
jnxCollPicIfFtpFiles Counter64,
jnxCollPicIfFtpFileRate Gauge32,
jnxCollPicIfPeakFtpFileRate Gauge32,
jnxCollPicIfFtpFailures CounterBasedGauge64,---- Error state information--
jnxCollPicIfCurrentState JnxCollPicStateDef,
jnxCollPicIfLastStateChange JnxCollPicStateDef,
jnxCollPicIfStateChangeTime TimeTicks,
jnxCollPicIfStateChangeDate DateAndTime,
jnxCollPicIfStateChangeType INTEGER}---- File statistics--jnxCollPicIfCreatedFiles OBJECT-TYPESYNTAXCounter64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of files created by this Collector PIC
since the last time the PIC was reset."
::={ jnxCollPicIfEntry 1}jnxCollPicIfCreatedFileRate OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of files created per second, measured over the
current 10 second interval."::={ jnxCollPicIfEntry 2}jnxCollPicIfPeakCreatedFileRate OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The peak number of files created per second."::={ jnxCollPicIfEntry 3}jnxCollPicIfExportedFiles OBJECT-TYPESYNTAXCounter64MAX-ACCESSread-only
STATUScurrentDESCRIPTION"The total number of files exported by this Collector PIC."::={ jnxCollPicIfEntry 4}jnxCollPicIfExportedFileRate OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of files exported per second, measured over
the current 10 second interval."::={ jnxCollPicIfEntry 5}jnxCollPicIfPeakExportedFileRate OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The peak number of files exported per second."::={ jnxCollPicIfEntry 6}jnxCollPicIfDestroyedFiles OBJECT-TYPE
SYNTAXCounter64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of files destroyed by this Collector PIC."::={ jnxCollPicIfEntry 7}jnxCollPicIfDestroyedFileRate OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of files destroyed per second, as measured over
the current 10 second interval."::={ jnxCollPicIfEntry 8}jnxCollPicIfPeakDestroyedFileRate OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The peak number of files destroyed per second."::={ jnxCollPicIfEntry 9}
---- Record statistics--jnxCollPicIfProcRecords OBJECT-TYPESYNTAXCounter64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of flow records processed by this Collector PIC."::={ jnxCollPicIfEntry 10}jnxCollPicIfProcRecordsRate OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of flow records processed per seconds, measured
during the current 10 second interval."::={ jnxCollPicIfEntry 11}jnxCollPicIfPeakProcRecordsRate OBJECT-TYPESYNTAXGauge32
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The peak number of flow records processed."::={ jnxCollPicIfEntry 12}---- Memory statistics--jnxCollPicIfMemoryUsed OBJECT-TYPESYNTAXCounterBasedGauge64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The amount of memory used, in bytes, by this Collector PIC."::={ jnxCollPicIfEntry 13}jnxCollPicIfMemoryFree OBJECT-TYPESYNTAXCounterBasedGauge64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The amount of memory free, in bytes, on this Collector PIC."::={ jnxCollPicIfEntry 14}
---- Ftp statistics--jnxCollPicIfFtpBytes OBJECT-TYPESYNTAXCounter64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of bytes transferred via FTP by this
Collector PIC."::={ jnxCollPicIfEntry 15}jnxCollPicIfFtpByteRate OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of bytes per second transfered via FTP measured
during the current 10 second interval."::={ jnxCollPicIfEntry 16}jnxCollPicIfPeakFtpByteRate OBJECT-TYPESYNTAXGauge32
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The peak number of bytes per second transferred via FTP."::={ jnxCollPicIfEntry 17}jnxCollPicIfFtpFiles OBJECT-TYPESYNTAXCounter64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of files transferred via FTP by this
Collector PIC."::={ jnxCollPicIfEntry 18}jnxCollPicIfFtpFileRate OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of files per second transferred via FTP."::={ jnxCollPicIfEntry 19}jnxCollPicIfPeakFtpFileRate OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The peak number of files per second transferred via FTP."::={ jnxCollPicIfEntry 20}jnxCollPicIfFtpFailures OBJECT-TYPESYNTAXCounterBasedGauge64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of FTP transfer failures on this Collector
PIC."::={ jnxCollPicIfEntry 21}---- Error State Information--jnxCollPicIfCurrentState OBJECT-TYPESYNTAX JnxCollPicStateDef
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION
"The current state of various error conditions on this
Collector PIC."::={ jnxCollPicIfEntry 22}jnxCollPicIfLastStateChange OBJECT-TYPESYNTAX JnxCollPicStateDef
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Identifies the error condition that last changed state."::={ jnxCollPicIfEntry 23}jnxCollPicIfStateChangeTime OBJECT-TYPESYNTAXTimeTicksMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The value of sysUpTime when the management subsystem last
learned of a change to the value of jnxCollPicIfCurrentState
for this Collector PIC."::={ jnxCollPicIfEntry 24}jnxCollPicIfStateChangeDate OBJECT-TYPE
SYNTAXDateAndTimeMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The system date and time when the management subsystem last
learned of a change to the value of jnxCollPicIfCurrentState
for this Collector PIC."::={ jnxCollPicIfEntry 25}jnxCollPicIfStateChangeType OBJECT-TYPESYNTAXINTEGER{none (1),set (2),cleared (3)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This indicates whether the last state change set a new
error condition or cleared an existing one."::={ jnxCollPicIfEntry 26}
--
-- Per Collector file data
--jnxCollFileTable OBJECT-TYPESYNTAXSEQUENCEOF JnxCollFileEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Data about each collector file currently present
on the router."::={ jnxCollectorMIB 3}jnxCollFileEntry OBJECT-TYPESYNTAX JnxCollFileEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry provides information about a single file currently
open on this Collector PIC. Each Collector PIC File is
identified by the ifIndex associated with the Collector PIC
and the name of the file."INDEX{ ifIndex, jnxCollFileName }::={ jnxCollFileTable 1}
JnxCollFileEntry ::=SEQUENCE{
jnxCollFileName DisplayString,
jnxCollFileFname DisplayString,
jnxCollFileRecords CounterBasedGauge64,
jnxCollFileRecordRate Gauge32,
jnxCollFilePeakRecordRate Gauge32,
jnxCollFileUncompBytes CounterBasedGauge64,
jnxCollFileUncompByteRate Gauge32,
jnxCollFilePeakUncompByteRate Gauge32,
jnxCollFileCompBytes CounterBasedGauge64,
jnxCollFileCompByteRate Gauge32,
jnxCollFilePeakCompByteRate Gauge32,
jnxCollFileBlocks Gauge32,
jnxCollFileCompBlocks Gauge32,
jnxCollFileTransferAttempts Gauge32,
jnxCollFileState INTEGER}jnxCollFileName OBJECT-TYPESYNTAXDisplayString(SIZE(1..115))MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The name of a Collector File on this Collector PIC."::={ jnxCollFileEntry 1}jnxCollFileFname OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The name of a Collector File on this Collector PIC. This
object is included for those NM applications that can't
parse the file name from the instance portion of the OIDs
and provides the value of jnxCollFileName explicitly."::={ jnxCollFileEntry 2}
jnxCollFileRecords OBJECT-TYPESYNTAXCounterBasedGauge64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of flow records in this file."::={ jnxCollFileEntry 3}jnxCollFileRecordRate OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of flow records per second added to this file,
measured during the current 10 second interval."::={ jnxCollFileEntry 4}jnxCollFilePeakRecordRate OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION
"The peak number of flow records per second added to this file."::={ jnxCollFileEntry 5}jnxCollFileUncompBytes OBJECT-TYPESYNTAXCounterBasedGauge64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of uncompressed bytes in this file."::={ jnxCollFileEntry 6}jnxCollFileUncompByteRate OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of uncompressed bytes per second added to this file."::={ jnxCollFileEntry 7}jnxCollFilePeakUncompByteRate OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-only
STATUScurrentDESCRIPTION"The peak number of uncompressed bytes per second added to this
file."::={ jnxCollFileEntry 8}jnxCollFileCompBytes OBJECT-TYPESYNTAXCounterBasedGauge64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of compressed bytes in this file."::={ jnxCollFileEntry 9}jnxCollFileCompByteRate OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of compressed bytes per second added to this file,
measured during the current 10 second interval."::={ jnxCollFileEntry 10}
jnxCollFilePeakCompByteRate OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The peak number of compressed bytes per second added to this file."::={ jnxCollFileEntry 11}jnxCollFileBlocks OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of blocks in this file."::={ jnxCollFileEntry 12}jnxCollFileCompBlocks OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of compressed blocks in this file."
::={ jnxCollFileEntry 14}jnxCollFileTransferAttempts OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of FTP transfer attempts for this file."::={ jnxCollFileEntry 15}jnxCollFileState OBJECT-TYPESYNTAXINTEGER{unknown(1),active (2),-- file is actively receiving flow recordswait (3),-- file is waiting for exportexport1(4),-- file is being exported to the primary serverexport2(5)-- file is being exported to the secondary server
}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The current state of this file."::={ jnxCollFileEntry 16}--
-- Collector PIC Notification objects
--jnxCollNotifyVars OBJECT-IDENTITYSTATUScurrentDESCRIPTION"Notification object definitions."::={ jnxCollectorMIB 4}jnxCollNotifyUrl OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"The URL associated with a file transfer destination."::={ jnxCollNotifyVars 1}
jnxCollNotifyInetType OBJECT-TYPESYNTAXInetAddressTypeMAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"Used with jnxCollNotifyInetAddress to identify a specific
file transfer destination."::={ jnxCollNotifyVars 2}jnxCollNotifyInetAddress OBJECT-TYPESYNTAXInetAddressMAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"Used with jnxCollNotifyInetType to identify a specific
file transfer destination."::={ jnxCollNotifyVars 3}jnxCollNotifyError OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSaccessible-for-notifySTATUScurrent
DESCRIPTION"Description of error encountered when trying to transfer a file."::={ jnxCollNotifyVars 4}jnxCollNotifyFile OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"Identifies a specific file for notifications that refer to a file."::={ jnxCollNotifyVars 5}jnxCollNotifyFtpResultCode OBJECT-TYPESYNTAXInteger32MAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"Provides the FTP result code for file transfer notifications."::={ jnxCollNotifyVars 6}jnxCollNotifyFtpErrorText OBJECT-TYPESYNTAXDisplayString
MAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"Provides the FTP error text for file transfer notifications."::={ jnxCollNotifyVars 7}jnxCollNotifyMemUtil OBJECT-TYPESYNTAXGauge32MAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"Provides the current memory utilization for pic overload
notifications."::={ jnxCollNotifyVars 8}jnxCollNotifyMemFree OBJECT-TYPESYNTAXGauge32MAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"Provides the current amount of free memory for pic overload
notifications."
::={ jnxCollNotifyVars 9}jnxCollNotifyMemThresh OBJECT-TYPESYNTAXGauge32MAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"Provides the current memory threshold used for determining
memory unavailable conditions."::={ jnxCollNotifyVars 10}jnxCollNotifyNewRecordRate OBJECT-TYPESYNTAXGauge32MAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"Provides the current number of new records per second created
on this Collector PIC."::={ jnxCollNotifyVars 11}jnxCollNotifyOverloadType OBJECT-TYPESYNTAXINTEGER{softOverload (1),
hardOverload (2)}MAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"Identifies a specific type of flow overload condition
on this Collector PIC."::={ jnxCollNotifyVars 12}jnxCollNotifyDate OBJECT-TYPESYNTAXDateAndTimeMAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"Provides the current system date and time."::={ jnxCollNotifyVars 13}jnxCollNotifyFromFtpServerInetType OBJECT-TYPESYNTAXInetAddressTypeMAX-ACCESSaccessible-for-notifySTATUScurrent
DESCRIPTION"Used with jnxCollNotifyFromFtpServerInetAddress to identify
a specific FTP server address."::={ jnxCollNotifyVars 14}jnxCollNotifyFromFtpServerInetAddress OBJECT-TYPESYNTAXInetAddressMAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"The FTP server address from which the switchover occurs."::={ jnxCollNotifyVars 15}jnxCollNotifyFromFtpServerType OBJECT-TYPESYNTAXINTEGER{primary (1),secondary (2)}MAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION
"The FTP server Type from which the switchover occurs."::={ jnxCollNotifyVars 16}jnxCollNotifyToFtpServerInetType OBJECT-TYPESYNTAXInetAddressTypeMAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"Used with jnxCollNotifyToFtpServerInetAddress to identify
a specific FTP server address."::={ jnxCollNotifyVars 17}jnxCollNotifyToFtpServerInetAddress OBJECT-TYPESYNTAXInetAddressMAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"The FTP server address to which the switchover occurs."::={ jnxCollNotifyVars 18}jnxCollNotifyToFtpServerType OBJECT-TYPE
SYNTAXINTEGER{primary (1),secondary (2)}MAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"The FTP server Type to which the switchover occurs."::={ jnxCollNotifyVars 19}jnxCollNotifyInitiatedBy OBJECT-TYPESYNTAXINTEGER{cli (1),automatic (2)}MAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"Identify what initiates the FTP switchover."::={ jnxCollNotifyVars 20}
--
-- Collector PIC Notification definitions
--jnxCollNotificationPrefix OBJECT-IDENTITYSTATUScurrentDESCRIPTION"All collector notifications are registered under this branch."::={ jnxCollectorNotifications 0}jnxCollUnavailableDest NOTIFICATION-TYPEOBJECTS{ ifDescr,
jnxCollNotifyDate,
jnxCollNotifyUrl,
jnxCollNotifyInetType,
jnxCollNotifyInetAddress }STATUScurrentDESCRIPTION"Notification of an unavailable destination failure encountered
while transferring a collector file."::={ jnxCollNotificationPrefix 1}jnxCollUnavailableDestCleared NOTIFICATION-TYPEOBJECTS{ ifDescr,
jnxCollNotifyDate,
jnxCollNotifyUrl,
jnxCollNotifyInetType,
jnxCollNotifyInetAddress }STATUScurrentDESCRIPTION"This indicates a previous unavailable destination failure
has been resolved."::={ jnxCollNotificationPrefix 2}jnxCollUnsuccessfulTransfer NOTIFICATION-TYPEOBJECTS{ ifDescr,
jnxCollNotifyDate,
jnxCollNotifyFile,
jnxCollNotifyUrl,
jnxCollNotifyInetType,
jnxCollNotifyInetAddress,
jnxCollNotifyError,
jnxCollNotifyFtpResultCode,
jnxCollNotifyFtpErrorText }STATUScurrentDESCRIPTION"This indicates an error was encountered while attempting
a file transfer."
::={ jnxCollNotificationPrefix 3}jnxCollFlowOverload NOTIFICATION-TYPEOBJECTS{ ifDescr,
jnxCollPicIfStateChangeDate,
jnxCollNotifyOverloadType,
jnxCollNotifyNewRecordRate,
jnxCollPicIfCreatedFiles,
jnxCollPicIfDestroyedFiles}STATUScurrentDESCRIPTION"This indicates a soft or hard flow overload condition has been
triggered."::={ jnxCollNotificationPrefix 4}jnxCollFlowOverloadCleared NOTIFICATION-TYPEOBJECTS{ ifDescr,
jnxCollPicIfStateChangeDate,
jnxCollNotifyOverloadType,
jnxCollNotifyNewRecordRate,
jnxCollPicIfCreatedFiles,
jnxCollPicIfDestroyedFiles }
STATUScurrentDESCRIPTION"This indicates a soft or hard flow overload condition has been
cleared."::={ jnxCollNotificationPrefix 5}jnxCollMemoryUnavailable NOTIFICATION-TYPEOBJECTS{ ifDescr,
jnxCollPicIfStateChangeDate,
jnxCollNotifyMemThresh,
jnxCollNotifyMemUtil,
jnxCollNotifyMemFree }STATUScurrentDESCRIPTION"This indicates a memory unavailable condition has been
triggered."::={ jnxCollNotificationPrefix 6}jnxCollMemoryAvailable NOTIFICATION-TYPEOBJECTS{ ifDescr,
jnxCollPicIfStateChangeDate,
jnxCollNotifyMemThresh,
jnxCollNotifyMemUtil,
jnxCollNotifyMemFree }STATUScurrentDESCRIPTION"This indicates a memory unavailable condition has been
cleared."::={ jnxCollNotificationPrefix 7}jnxCollFtpSwitchover NOTIFICATION-TYPEOBJECTS{ ifDescr,
jnxCollNotifyDate,
jnxCollNotifyFromFtpServerInetType,
jnxCollNotifyFromFtpServerInetAddress,
jnxCollNotifyFromFtpServerType,
jnxCollNotifyToFtpServerInetType,
jnxCollNotifyToFtpServerInetAddress,
jnxCollNotifyToFtpServerType,
jnxCollNotifyInitiatedBy }STATUScurrentDESCRIPTION"This indicates an FTP server switchover has occurred."::={ jnxCollNotificationPrefix 8}END